PowerView
Hand-held contol panel for network administrators that configures and controls UPSs in rack, computer room, and datacenter environments. Attach this hand-held device to a Smart-UPS, Matrix-UPS, or Symmetra Power Array to monitor and control the UPS from a distance of up to 15 feet. You operate the easy-to-use display with your fingertips as you select options from the device's menu-driven interface to control and monitor the connected UPS and its accessories. Functions include status reporting, setup, UPS control, and event logging. Four LED indicators report the operational status of the connected UPS, indicating whether it is on-line, on-battery, on-bypass, or experiencing an internal fault condition. The Operation of the Display is divided into six functional areas, each area accessible through and item in the top-level menu:
- UPS Status
- UPS Setup
- UPS Control
- Event Logging
- Control/Status of Accessories
- Configuration of the Display
Four LED indicators across the upper face of the Display provide an overall operational status of the connected UPS:
- LOAD ON: Green Indicates that the UPS is supplying power to the load
- ON BATTERY: Yellow Indicates that power to the attached load is being supplied by the UPS batteries
- BYPASS: Yellow Indicates that power to the load is being supplied directly from the power utility. The UPS has been effectively removed from the circuit. (Matrix-UPS only)
- FAULT: Red Indicates that the UPS has detected an internal fault condition