|
The GCN1000 provides remote access to a computer or compatible KVM switch, allowing you to control or monitor it from literally anywhere in the world. An Internet connection, a browser, and the current IP address of your router are all that is required. The unit is completely hardware-based, eliminating the need for a working operating system on the local computer in order to function. Communication between the GCN1000 and the remote computer takes place over a network (or the Internet). This makes the GCN1000 ideal for remote file transfer, or troubleshooting computers that do not boot properly, for changing BIOS settings, or for selecting an operating system in a multiple-boot situation. After connecting to a remote computer with the GCN1000, performing tasks on the remote computer is virtually identical to sitting at the machine itself. The unit supports up to eight users - of which two may be logged on simultaneously (only one operator has control of the remote computer). Message board provisions are included to aid in collaborative troubleshooting, and to alleviate access conflicts between users. The GCN1000's security is provided by a user name and password logon consisting of a minimum of 6 to a maximum of 16 characters and SSL 128 bit encryption. The two applications used to access the GCN1000 are run from the unit itself, removing the need to install software on either the host or client PCs. The GCN1000 incorporates a USB2.0 Virtual Media port which sends data through the GCN1000 to the remote computer. The Virtual Media port acts as a virtual USB port, allowing the user to attach a USB flash drive and use it as though it were plugged into a local USB port. File transfer and media streaming are made possible by the Virtual Media port (booting is not possible from the Virtual Media port).
|