Sharp
UX-300 Refurb fax

Product specification are:
Automatic dialing Rapid Key Dialing: 5 numbers; Speed Dialing: 40 numbers
Imaging film NX-3CR (two rolls in package, one roll yields approx. 100 letter-size pages)
Automatic document feeder 10 sheets max.
Memory size 512 KB (approx. 30 average pages)
Modem speed 9600 bps with automatic fallback to 7200, 4800, or 2400 bps
Transmission time Approx. 15 seconds
Reception modes TEL/FAX/A.M. (Note: A.M. mode is for connecting an answering machine)
Resolution -
- Horizontal: 8 pels/mm
- Vertical: Standard: 3.85 lines/mm
- Fine /Halftone: 7.7 lines/mm
- Super fine (transmission only): 15.4 lines/mm
Display 16-digit LCD display
Recording system Thermal transfer recording
Paper tray capacity (16- to 20-lb. paper)
- Letter: 60 sheets
- Legal: 30 sheets
Halftone (grayscale) 64 levels
Applicable telephone line Public switched telephone network
Compatibility ITU-T (CCITT) G3 mode
Compression scheme MH, MR, Sharp
Scanning method Sheet-feeder CIS (Contact Image Sensor)
Effective printing width 208 mm max.
Input document size
- Automatic feeding: Width: 148 to 216 mm; Length: 140 to 279 mm
- Manual feeding: Width: 148 to 216 mm; Length: 140 to 600 mm
Effective scanning width 210 mm max.
Contrast control Automatic/Dark selectable
Copy function Standard
Telephone function Standard (cannot be used if power fails)
Power requirements 120 V AC, 60 Hz
Operating temperature 5 to 35°C
Humidity Maximum: 85 %
Power consumption Stand-by: 4.2 W; Maximum: 100 W
Dimensions Width: 343 mm; Depth: 256 mm; Height: 182 mm
Weight Approx. 3.3 kg